Home

Research Areas

Grants & Contracts

Publications

Teaching

Services

MAE Dept.

CoE

MU

RA Available

Online Resources

Yuwen Zhang

Professor

Fellow ASME and Associate Fellow AIAA

Mechanical and Aerospace Engineering
University of Missouri
Columbia, MO 65211, USA
Tel: (573) 884-6936, Fax: (573) 884-5090

 Email: zhangyu@missouri.edu

 

 

Publications

Books/Book Chapters

Journal Articles

Conference Papers

 

74.       Huang, J., Zhang, Y., and Chen, J. K. “Effect of Energy Deposition Modes on Ultrafast Solid-Liquid-Vapor Phase Change of a Thin Gold Film Irradiated by a Femtosecond Laser,” 14th International Heat Transfer Conference, August 8-13, 2010.

73.          Zhou, J., Chen, J. K, and Zhang, Y., “Nonclassical Heat Transfer Models for Laser-Induced Thermal Damage in Biological Tissues,” 14th International Heat Transfer Conference, August 8-13, 2010.

72.       Xu, J., Zhang, Y., and Ma, H. B., “Liquid-Vapor Oscillating Flow and Heat Transfer in a U-Shaped Minichannel with Internal Wick Structure,” ASME 2nd Micro/Nanoscale Heat Transfer International Conference, Shanghai, December 18-21, 2009.

71.       Huang, J., Zhang, Y., Chen, J. K., Yang, M., “Ultrafast Solid-Liquid-Vapor Phase Change Processes in a Thin Metal Film Irradiated by Femtosecond Laser Pulse Trains,” International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, November 13-19, 2009.

70.       Zhou, J., Zhang, Y., Chen, J. K., and Feng, Z. C., “Inverse Heat Conduction in Composites with Pyrolysis Effect and Temperature-Dependent Thermophysical Properties,” International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, November 13-19, 2009.

69.       Zhang, Y., “Generalized Dual-Phase Lag Bioheat Equations Based on Nonequilibrium Heat Transfer in Living Biological Tissues,” International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, November 13-19, 2009.

68.       Zhang, Y., Feng, Z.C., and Chen, J. K., “Determination of the Front Surface Temperature of Metal Target Subject to HEL Irradiation,” Directed Energy Test and Evaluation Conference, Albuquerque, NM, August 10-12, 2009.

67.       Xiao, B., and Zhang, Y., “Advances in Thermal Modeling of Selective Laser Sintering of Metal Powders,” 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi’an, China, July 11-15, 2009.

66.       Zhang, K., Yang, M., Huang, F., and Zhang, Y., Non-Linear Characteristic of Numerical Solution in an Annulus with an Internal Slotted Cylinder, 20th International Symposium on Transport Phenomena, Victoria, British Columbia, Canada, July 7-10, 2009. 

65.       Zhang, K., Yang, M., Huang, F., and Zhang, Y., Periodic Oscillation of Numerical Solution in an Annulus with an Internal Slotted Cylinder, 20th International Symposium on Transport Phenomena, Victoria, British Columbia, Canada,  July 7-10, 2009. 

64.       Zhao, M., Yang, M., Lu, M., Yu, M., and Zhang, Y.W., “Self-Sustained Oscillations and Bifurcations of Mixed Convection in a Multiple Ventilated Enclosure” 20th International Symposium on Transport Phenomena, Victoria, British Columbia, Canada, July 7-10, 2009.

63.       Zhao, M., Yang, M., Lu, M., Yu, M., and Zhang, Y.W., “Evolution to Chaotic Mixed Convection in a Multiple Ventilated Enclosure”  20th International Symposium on Transport Phenomena, Victoria, British Columbia, Canada, July 7-10, 2009.  

62.       Shao, W., and Zhang, Y., “Thermally-Induced Oscillatory Flow and Heat Transfer in a U-Shaped Minichannel,” 41st AIAA Thermophysics Conference, San Antonio, TX, June 22-25, 2009.

61.       Zhou, J., Zhang, Y., Chen, J. K., Feng, Z.C., “Inverse Heat Conduction in a Finite Slab with Measured Back Surface Temperature or/and Heat Flux,” Proceedings of the 47th AIAA Aerospace Sciences Meeting, Orlando, FL., January 5-9, 2009.

60.       Zhou, J., Zhang, Y., and Chen, J. K., “Numerical Simulation of Random Packing of Spherical Particles for Selective Laser Sintering Applications,” International Mechanical Engineering Congress and Exposition, Boston, MA, October 31 - November 16, 2008.

59.       Zhou, J., Chen, J.K., and Zhang, Y., “Non-Fourier Effects on Thermal Damage to Biological Tissues Caused by Laser Irradiation,” International Mechanical Engineering Congress and Exposition, Boston, MA, October 31 - November 16, 2008.

58.       Zhang, Y., Li, L., and Ma, H. B., “Effect of Brownian and Thermal Diffusions of Nanoparticles on Nonequilibrium Heat Conduction in Nanofluids,” 2008 ASME Summer Heat Transfer Conference, Jacksonville, FL, August, 10-14, 2008.

57.       Zhang, Y., Chen, J. K., and Feng, Z.C., “Heat Flux Sensor Array (HFSA),” Directed Energy Test and Evaluation Conference, Albuquerque, NM, July 29-31, 2008.

56.       Zhang, Y., Tzou, D.Y., and Ma, H.B., “Heat Conduction in Nanofluid under Periodic Boundary Condition: Nonequilibrium Modeling and Effect of Nanoparticle Diffusion,” Micro/Nanoscale Heat Transfer International Conference, Tainan, Taiwan, January 6-9, 2008.

55.       Zhang, Y., and Faghri, A., “Advances and Unresolved Issues in Pulsating Heat Pipes,” Micro/Nanoscale Heat Transfer International Conference, Tainan, Taiwan, January 6-9, 2008.

54.       Zhou, J., Chen, J.K., and Zhang, Y., “A Rate Equation-Based Theoretical Model for the Plasma Formation in Liquids Induced by Short Pulsed Laser,” Micro/Nanoscale Heat Transfer International Conference, Tainan, Taiwan, January 6-9, 2008.

53.       Zhou, J., Zhang, Y., Chen, J.K., and Smith, D.E., “A Nonequilibrium Thermal Model for Rapid Heating and Pyrolysis of Organic Composites,” Proceedings of 2007 International Mechanical Engineering Congress and Exposition, Seattle, WA, November 10-16, 2007

52.       Zhang, Y., and Chen, J.K., “An Interfacial Tracking Method for Ultrashort Pulse Laser Melting and Resolidification of a Thin Metal Film,” 2007 ASME-JSME Thermal Engineering Conference and Summer Heat Transfer Conference, Vancouver, BC, Canada, July 8-12, 2007

51.       Ma, H. B., Borgmeyer, B., Cheng, P., and Zhang, Y., “A Mathematic Model Predicting Heat Transfer Performance in an Oscillating Heat Pipe,” 2007 ASME InterPACK, Vancouver, BC, Canada, July 8-12, 2007

50.       Zhou, J., Zhang, Y., and Chen, J.K., “Numerical Study of Ultrafast Laser Propagation in Biological Tissues with Embedded Tumors and Blood Vessels,” Proceedings of 2006 International Mechanical Engineering Congress and Exposition, Chicago, IL, Nov. 5-10, 2006.

49.       Xiao, B., and Zhang, Y., “Numerical Simulation of Direct Metal Laser Sintering of Single-Component Powder on Top of Sintered Layers,” Proceedings of 2006 International Mechanical Engineering Congress and Exposition, Chicago, IL, Nov. 5-10, 2006.

48.       Shi, Y., and Zhang, Y., “Simulation of Random Packing of Spherical Particles with Different Size Distributions,” Proceedings of 2006 International Mechanical Engineering Congress and Exposition, Chicago, IL, Nov. 5-10, 2006.

47.       Chen, T., and Zhang, Y., “Three-Dimensional Simulation of Multiple-Line Scan Laser Sintering of a Two-Component Metal Powder Layer on Top of Sintered Layers,” Proceeding of 2005 International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 5-12, 2005.

46.       Chen, T., and Zhang, Y., “Thermal Modeling of Metal Powder-Based Selective Laser Sintering,” Proceedings of 16th Solid Freeform Fabrication Symposium, Austin, TX, Aug. 1-3, 2005.

45.       Chen, T., and Zhang, Y., “Three-Dimensional Modeling of Laser Sintering of a Two-Component Metal Powder Layer on Top of Sintered Layers,” Proceedings of 2005 ASME Summer Heat Transfer Conference, San Francisco, CA, July 17-22, 2005

44.       Xiao, B., and Zhang, Y., “Partial Melting and Resolidification of Single-Component Metal Powder with a Moving Laser Beam,” Proceedings of 2005 ASME Summer Heat Transfer Conference, San Francisco, CA, July 17-22, 2005

43.       Boyden, S., and Zhang, Y., “On Prediction of the Temperature Dependence Absorptivities of Pure Metal and Alloys at 1.06 μm and 10.6 μm,” Proceedings of the 38th AIAA Thermophysics Conference, Toronto, Canada, June 6-9, 2005.

42.       Chen, T., and Zhang, Y., “Three-Dimensional Simulation of Selective Laser Sintering of a Two-Component Metal Powder Layer with Finite Thickness,” Presented at 2004 International Mechanical Engineering Congress and Exposition, Anaheim, CA, Nov. 13-19, 2004.

41.       Xiao, B., and Zhang, Y., “Analysis of Melting in a Single-Component Metal Powder Bed Subject to Constant Heat Flux Heating,” Proceedings of 2004 ASME Heat Transfer/Fluid Engineering Summer Conference, Charlotte, NC, July 11-15, 2004

40.       Chen, T., and Zhang, Y., “A Parametric Study on Melting and Resolidification of a Two-Component Metal Powder Layer on Top of the Sintered Metal Layers,” Proceedings of 6th International Heat Transfer Symposium, Beijing, China, June 15-19, 2004.

39.       Chen, T., and Zhang, Y., “Melting and Resolidification of a Two-Component Metal Powder Layer Heated by a Moving Gaussian Heat Source,” Proceedings of 2003 International Mechanical Engineering Congress and Exposition, Washington, DC, Nov. 15-21, 2003.

38.       Chen, T., and Zhang, Y., “Two-Dimensional Modeling of Sintering of a Two-Component Metal Powder Layer on Top of Multiple Sintered Layers with a Gaussian Heat Source,” Proceedings of 14th Solid Freeform Fabrication Symposium, pp. 208-218, Austin, TX, Aug. 4-6, 2003.

37.       Chen, T., and Zhang, Y., “Analysis of Melting in a Mixed Powder Bed with Finite Thickness Subjected to Constant Heat Flux Heating,” Proceeding of ASME Summer Heat Transfer Conference, Las Vegas, NV, July 21-23, 2003.

36.       Zhang, Y., “A Parametric Study on Shape and Cross-Sectional Area of the Thin Film Produced by Laser Chemical Vapor Deposition with a Moving Laser Beam,” Proceedings of 6th JSME/ASME Thermal Engineering Joint Conference, Hawaii Island, HI, March 16-20, 2003. 

35.       Zhang, Y., “Quasi-Steady State Natural Convection in Laser Chemical Vapor Deposition with a Moving Laser Beam,” Proceedings of 2002 International Mechanical Engineering Congress and Exposition, New Orleans, LA, Nov. 17-21, 2002.

34.       Zhang, Y., “Analysis of Melting in an Enclosure under Boundary Condition of the Third Kind,” Proceedings of the 12th International Heat Transfer Conference 2002, Vol. 3, pp. 315-320, Grenoble, France, August 18-23, 2002

33.       Zhang, Y., and Faghri, A., “Oscillatory Flow in Pulsating Heat Pipes with Arbitrary numbers of Turns,” 8th Joint AIAA/ASME Thermophysics and Heat Transfer Conference, St. Louis, Missouri , June 24-27, 2002

32.       Shafii, M.B., Faghri, A., and Zhang, Y., “Thermal Modeling of Unlooped and Looped Pulsating Heat Pipes,” Proceedings of 2001 IMECE, New York, NY, Nov. 11-16, 2001 (invited paper).

31.       Zhang, Y., and Faghri, A., “Numerical Simulation of Condensation on a Capillary Grooved Structure,” Proceedings of the ASME, Heat Transfer Division – 2000, HTD-Vol. 366-4, Orlando, FL, Nov. 5-10, 2000.

30.       Zhang, Y., Faghri, A., Shafii, M. B., “Capillary Blocking in Forced Convective Condensation in Horizontal Miniature Channels,” Proceedings of the National Heat Transfer Conference, Pittsburgh, PA, August 20-22, 2000.

29.       Zhang, Y., Faghri, A., Buckley, C.W., and Bergman, T.L., “3-D Sintering of Two Components Metal Powders with Stationary and Moving Laser Beams,” Proceedings of the ASME, Heat Transfer Division --1999, HTD-Vol. 364-3, pp. 211-223, Nashville, TN, Nov. 14-19, 1999.

28.       Zhang, Y., and Faghri, A., “Analysis of Freezing in an Eccentric Annulus,” Proceedings of 1996 IMECE, HTD- Vol. 334-3, pp. 321-328, Atlanta, GA, Nov. 17-22, 1996.

27.       Chen, M.Y., Zhang, Y., and Chen, Z.Q., “Solidification in a Finite Slab with Boundary Condition of the Third Kind,” Proc. of Int. Symp. on Fluid Machinery and Fluid Engineering, Beijing, China, 1996.

26.       Zhang, Y., and Chen, Z.Q., “Analysis of Melting in an Enclosure with Discrete Heating at Constant Temperature,” Proc. of 10th International Heat Transfer Conference, Vol. 4, pp. 181-186, Brighton, England, 1994.

25.       Chen, M.Y., Zhang, Y., and Chen, Z.Q., “Freezing of Cylindrical Shaped Foodstuffs with Boundary Condition of the Third Kind,” Multiphase Flow and Heat Transfer, 3rd Int. Symp. (Edited by X.J. Chen et al.), Vol. 1, pp. 126-133, Xi'an Jiaotong University Press and Begell House, Inc., Xi'an, China, 1994.

24.       Ju, Y.L., and Zhang, Y., “Solidification Process of Spacecraft Thermal Control system with Fin Array,” Multiphase Flow and Heat Transfer, 3rd Int. Symp. (Edited by X.J. Chen et al.), Vol. 2, pp. 1349-1355, Xi'an Jiaotong University Press and Begell House, Inc., Xi'an, China, 1994.

23.       Ju, Y.L.,, Zhang, Y., and Chen, Z.Q., “Solidification in Spacecraft Thermal Control System with Radiation Cooling,” Proc. of the 5th National Interuniversity Conference on Engineering Thermophysics, pp. 446-449, Dalian University of Technology Press, 1994 (in Chinese).

22.       Chen, M.Y.,, Zhang, Y., and Chen, Z.Q., “Melting in a Subcooled Semi-Infinite Ice Layer with Solar Irradiation and Convection -Radiation Cooling,” Proceeding of the 5th National Interuniversity Conference on Engineering Thermophysics, pp. 495-498, Dalian University of Technology Press Press, 1994 (in Chinese).

21.       Zhang, Y., and Chen, Z.Q., “Melting in an Ice Layer with Solar Irradiation and Convection- Radiation Cooling,” Proc. of the 6th Int. Symp. on Transport Phenomena in Thermal Engineering, Vol. 4, pp. 195-198, Seoul, Korea, 1993.

20.       Zhang, Y., and Chen, Z.Q., “Effect of Solid-Solid Phase Change on Solidification of n-Heptadecane,” Proc. of the 5th Conference on Computational Heat Transfer, pp. 68-71, Higher Education Press, 1993 (in Chinese).

19.       Chen, M.Y.,, Zhang, Y., and Chen, Z.Q., “Analytical Solution of Solidification in a Superheated Semi-Infinite Liquid Region with boundary condition of the third Kind,” Proc. of the 5th Conference on Computational Heat Transfer, pp. 72-75, Higher Education Press, 1993 (in Chinese).

18.       Zhang, Y., and Chen, Z.Q., “Effect of Subcooling on Melting in an Enclosure with Discrete Heat Sources,” Proc. of the 5th Conference on Computational Heat Transfer, pp. 76-79, Higher Education Press, 1993 (in Chinese).

17.       Ju, Y.L.,, Zhang, Y., and Chen, Z.Q., “Numerical Solution of Coupled Laminar Heat- Mass Transfer in a Tube with Boundary Conditions of the Third Kind,” Proc. of the 5th Conference on Computational Heat Transfer,  pp. 193-196, Higher Education Press, 1993 (in Chinese).

16.       Chen, Z.Q., Zhang, Y., and Liu, X.D., “Heat Dissipation of an Isolated Phase Circular Bus with Forced Convective Cooling,” Proc. of the 5th Conference on Computational Heat Transfer, pp. 249-253, Higher Education Press, 1993 (in Chinese).

15.       Chen, Z.Q., and Zhang, Y., “Analytical Solution to the Solidification Problem in Semi- Infinite Domain with Radiant Condition,” Proceeding of the 4th National Interuniversity Conference on Engineering Thermophysics, pp. 293-296, Zhejian University Press, 1992 (in Chinese).

14.       Zhang, Y., and Chen, Z.Q., “An Approximate Solution of 1-D Melting in a Finite Slab,” Proceeding of the 4th National Interuniversity Conference on Engineering Thermophysics, pp. 185-188, Zhejian University Press, 1992 (in Chinese).

13.       Zhang, Y., and Chen, Z.Q., “An Integral Solution for Melting of a Finite Slab with CHF Heating and Radiation Cooling,” Proc. of Joint Conference of the 5th Int. Symp. on Transport Phenomena and the 3rd Int. Symp. of Heat Transfer (Edited by B.X. Wang), pp. 511-516,  Higher Education Press, Beijing, 1992.

12.       Zhang, Y., and Chen, Z.Q., “Analytical Solution of Heat Transfer in Melting in an Enclosure with Discrete Heating at Constant Rate,” Proceeding of 1992 Heat and Mass Transfer Conference, Chinese Association of Engineering Thermophysics, Yantai, 1992 (in Chinese).

11.       Zhang, Y., and Chen, Z.Q., “An Integral Approximate Solution of Melting in a Finite Slab with Constant Heat Flux Heating,” Proceeding of the 4th Computational Heat Transfer Conference, Jinan, 1991 (in Chinese).

10.       Zhang, Y., Chen, Z.Q., and Wang, Q.J., “Analytical Solution of Melting in a Subcooled Semi- Infinite Solid with Boundary Condition of the Second Kind,” Proc. of ICHMT Int. Symp. on Manufacturing and Materials Processing, Vol. 1, pp. 321-330, Dubrovink, Yugoslavia, August, 1990.

9.         Zhang, Y., and Chen, Z.Q., “The Effect of Gap between Layers on the Heat Transfer Performance of Aligned Tube Banks,” Advances in Energy Conversion (Proc. of the 1st International Conference on Energy Conversion and Application), Huazhong University of Science and Technology Press, Wuhan, China, 1990.

8.         Zhang, Y., and Chen, Z.Q., “Analytical Solution of Coupled Laminar Heat-Mass Transfer Inside a Tube with Adiabatic External Wall,” Proceeding of the 3rd National Interuniversity Conference on Engineering Thermophysics, pp. 341-345, Xi’an Jiaotong University Press, 1990 (in Chinese).

7.         Zhang, Y., and Chen, Z.Q., “Semi-Analytical Solution of Melting in a Finite Slab with the Boundary Condition of the Second Kind,” Proceeding of the 7th Annual Conference of Chinese Association of Engineering Thermophysics, Nanjing, 1990 (in Chinese).

6.         Zhang, Y., Chen, Z.Q., and Guo, Z.Y., “Investigation of a One-Dimensional Inviscid Flow in a Channel with Heating or Cooling,” Proceeding of the 7th Annual Conference of Chinese Association of Engineering Thermophysics, Nanjing, 1990 (in Chinese).

5.         Zhang, Y., and Chen, Z.Q., “Experimental Investigation of the Local and Average Heat Transfer Performance of Packed Aligned Tube Banks in Crossflow,” Power Machinery and Engineering Thermophysics, pp. 175-179, Xi’an Jiaotong University Press, 1989 (in Chinese).

4.         Zhang, Y., and Chen, Z.Q., “Forced Convective Heat Transfer Aligned Tube Bank with Different Diameters,” Proceeding of 1989 Heat and Mass Transfer Conference, Chinese Association of Engineering Thermophysics, Lushang, 1989 (in Chinese).

3.         Zhang, Y., and Chen, Z.Q., “Numerical Solution of Coupled Laminar Heat-Mass Transfer in a Tube with Uniform Heat Flux,” Proceeding of the 3rd Computational Heat Transfer Conference, pp. 21-24, Shanghai, 1989 (in Chinese).

2.         Zhang, Y., Chen, Z.Q., “Local Non-Similarity Solution of Coupled Heat-Mass Transfer of a Flat Plate with Uniform Heat Flux in a Laminar Parallel Flow,” 1987 Heat and Mass Transfer Conference, Chinese Association of Engineering Thermophysics, Emei, Sichun 1987 (in Chinese).

1.         Zhang, Y., and Chen, Z.Q., “Numerical Analysis of Fin Surface with Radiation and Convection,” 1987 Heat and Mass Transfer Conference, Chinese Association of Engineering Thermophysics, Emei, Sichun 1987 (in Chinese).

 

Return to Home.